800-220-1075
| Items |
 /Asset/steel-grit-g12.jpg SGGL 12 GL Steel Grit |
/Asset/steel-grit-g12.jpg SGGL 14 GL Steel Grit |
/Asset/steel-grit-g12.jpg SGGL 16 GL Steel Grit |
 /Asset/steel-grit-g18.jpg SGGL 18 GL Steel Grit |
/Asset/steel-grit-g18.jpg SGGL 25 GL Steel Grit |
|||||
| Description |
Cast steel angular grit is produced by crushing specially heat treated shot pellets. Its behavior characteristics in service are very much dependent upon the hardness selection of GP, GB, GL or GR grit. Although harder and more aggressive than GB Steel Grit, GL also loses its sharp edges during abrasive blasting and is particularly suited to descaling and surface preparation applications. |
|||||||||
| Designation | GL 12 | GL 14 | GL 16 | GL 18 | GL 25 | |||||
| Formulation | GL Steel Grit | |||||||||
| Material | Steel | |||||||||
| Mesh Size | 0.0555 to 0.0661 in1.400 to 1.700 mm | 0.0469 to 0.0555 in1.180 to 1.140 mm | 0.0394 to 0.0469 in1.000 to 1.180 mm | 0.0278 to 0.0394 in0.710to 1.000 mm | 0.0165 to 0.0278 in0.425 to 0.710 mm | |||||
| Screen Number | 12 to 14 | 14 to 16 | 16 to 18 | 18 to 25 | 25 to 40 | |||||
| Shape When New | Angular | |||||||||
| Shape | Angular | |||||||||
| Sieve analysis | According to standard SAE J 444 | |||||||||
| Chemical analysis | According to standard SAE J827 shot / J1993 grit | |||||||||
| Micro Hardness | 54 - 61 HRC | |||||||||
| Victors | 613 - 697 HV | |||||||||
| Standard deviation | ±3Rc or ± 60 HV | |||||||||
| Microstructure | Well controlled manufacturing gives die a martensitic structure that blends the iron and carbon atoms in the finest and most ideal way possible. This structure produces a homogeneity or hardness and resistance throughout the shot. Without this structure the shot would not have the resistance necessary for the applications in which it is used. | |||||||||
| Minimum Density Measured by Alcohol Displacement | > 7.3 g/cm | |||||||||
|
|
||||||||||
