Item # 3.0AB, Air Blast Tumbler System On Omni Finishing

Gibson Tumble Blasters process multiple parts, ranging in size from small to medium, with a level of speed and efficiency unmatched by other types of equipment in a comparable price range.

Gibson produces Air Blast Tumblers in four standard models with load capacities ranging up to 800 pounds or 6 cubic feet.

These rugged machines automate profiling, peening, cleaning, deburring, finishing and many other surface-conditioning tasks on a vast range of parts.

Plus they are simple to operate. The operator loads parts onto a rugged perforated belt, closes the loading door, sets the timer and pushes the start button. By tumbling parts within the blast envelope, these machines deliver consistent results automatically whether working intermittently or non-stop in a multi-shift production facility.

Applications: Batches of parts that can tumble on top of each other without causing damage to the parts.

Advantages: Can run large batches of smaller parts all together, nNo manual flipping or rotating, all sides will be blasted if they tumble properly.

Unit of Measure

Specifications | Capabilities

Specifications

Work Load Capacity	N/A 3.0 ft³400 lb
Media Charge Capacity (Alox)	N/A 150 lb
Tumble Blaster Height, Cabinet Only	N/A 116 in
Tumble Blaster Width, Cabinet Only	N/A 60 in
Tumble Blaster Depth, Cabinet Only	N/A 70 in
Dust Collector Height	N/A 83 in
Dust Collector Width	N/A 40 in
Dust Collector Depth	N/A 26 in
Oscillating Blast Guns	N/A 4
Compressed Air Requirement at 80 psi	N/A 148 SCFM
Ventilation Requirement	N/A 800 CFM
Electrical Requirement - Voltage	N/A 460 V
Electrical Requirement - Frequency	N/A 60 Hz
Electrical Requirement - Phase	N/A 3
Electrical Requirement - Current (Tumble Blaster Only)	N/A 1.4 A
Electrical Requirement - Current (with Dust Collector)	N/A 4.2 A
Pneumatic Vertical Door	N/A Standard
Reversing Mill Belt	N/A Standard
Standard Mill Belt Hole Size	N/A 3/16 in
Initial Abrasive Fill	N/A 100 lb
AR400 Cabinet Liners	N/A Standard
Standard Door Liner	N/A AR Rubber
Dust Collector CFM Required	N/A 800 CFM
Work Load Dimensions Width x Diameter	N/A 31 x 24 in
Standard Machine Weight	N/A 2200 lb
Noise level	N/A 60 dB
Cyclone Separator	N/A Standard
CFM Air Requirement @ 90 psi	N/A 224 CFM

Capabilities

Standard Features	N/A Tunable media reclaimer Abrasive-resistant barrel heads and door liners Mill jam protection Hour meter Dial timer Solid construction Safety interlocks Reversing mill belt Number of Blast nozzles (4) 400 lb. load capacity Pneumatic front door 3 phase operation Low noise level Low profile design Low initial investment Superior parts cleaning
Blast Cleaning Solutions for:	N/A Ferrous and non-ferrous castings Heat treated parts Automotive parts Die Castings Deflashing plastic Deburring Descaling Peening
Available Options	N/A Mill belt hole sizes and cleats Single phase electrics Manganese liners Stainless steel liners Variable speed motors Dust collectors

Specifications

Work Load Capacity

Media Charge Capacity (Alox)

Tumble Blaster Height, Cabinet Only

Tumble Blaster Width, Cabinet Only

Tumble Blaster Depth, Cabinet Only

Dust Collector Height

Dust Collector Width

Dust Collector Depth

Oscillating Blast Guns

Compressed Air Requirement at 80 psi

Ventilation Requirement

Electrical Requirement - Voltage

Electrical Requirement - Frequency

Electrical Requirement - Phase

Electrical Requirement - Current (Tumble Blaster Only)

Electrical Requirement - Current (with Dust Collector)

Pneumatic Vertical Door

Reversing Mill Belt

Standard Mill Belt Hole Size

Initial Abrasive Fill

AR400 Cabinet Liners

Standard Door Liner

Dust Collector CFM Required

Work Load Dimensions Width x Diameter

Standard Machine Weight

Noise level

Cyclone Separator

CFM Air Requirement @ 90 psi

Capabilities

Standard Features

Blast Cleaning Solutions for:

Available Options